|
Products
General
Information
| |
ABS™ Ratchet Strap Assemblies
 ABS™ Controlled Release
Ratchet Tiedown System
with #1860 ABS ™ Ratchet (Pat. #5,271,606)
 LoadGardÔ Blue Standard Treated Webbing
End Fitting |
Length |
MBS* |
WLL* |
Part # |
| Flat Hook
(FH) |
27 ft. |
6,000 lbs. |
2,000 lbs. |
6RA27FH-B |
|
27 ft. |
10,000 lbs. |
3,335 lbs. |
10RA27FH-B |
|
|
|
|
|
| Delta
Ring (DR) |
27 ft. |
6,000 lbs. |
2,000 lbs. |
6RA27DR-B |
|
27 ft. |
10,000 lbs. |
3,335 lbs. |
10RA27DR-B |
|
|
|
|
|
| Chain and
Grab Hook (CG) |
27 ft. |
10,000 lbs. |
3,335 lbs. |
10RA27CG-B |
|
|
|
|
|
| Triangle
and Grab Hook (TH) |
27 ft. |
10,000 lbs. |
3,335 lbs. |
10RA27TH-B |
SpanSet's ABS Controlled Release Ratchet Tiedown System gives the operator total
control of the load both during load securement and release.
- Double latch ratchet system allows much higher pre-tension to be applied during initial
load securement, allowing a fine adjustment for greater pre-tension.
- Dual control release system allows release of the pre-tension step by step, one
"notch" at a time, to ensure stability of the load prior to final release.
- The patented ABS SpanSet Ratchet Tiedown System features a distinguishing blue epoxy
finish for surface protection and a double locking mechanism for load transport security.
*MBS = Minimum Break Strength; WLL = Working Load Limit
Special Assemblies available upon request.
See Corner Protectors.
Last modified: February 25, 2005
| |
Chains
LoadBinders
Cargo Bar Holder
Link to
the Federal Motor Carrier Standards
|
-USA
