Work Restraint - Rooftop Safety

USRF1 : Roofers Kit 1

A kit allowing freedom of movement in various rooftop scenarios, maintaining safety and security while working at height.

This kit incorporates an anchor for use on wooden truss structures that, together with the harness and other equipment help to provide a full PPE roof top solution.

Harness available in STD, LG AND XL Sizes

• US1100 or US1101 harness with rear
  attachment point
• One Truss Anchor complete with nails
• One Travel Restraint Line
• 6 ft Fall Arrest Lanyard with safety hooks
• Complete with kit bag
• Clear instructions
• Inspection information pocket card

USRF2 : Roofers Kit 2

This kit allows freedom of movement in various rooftop scenarios, maintaining safety and security while working at height. This kit incorporates an anchor for use on wooden truss structures that together with the harness and other equipment help to provide a full PPE roof top solution.

The Harness also has front attachment points to allow attachment to vertical fall arrest systems or for rescue purposes .

Harness available in STD, LG AND XL Sizes

• US1104 harness with rear attachment point
• One Truss Anchor complete with nails
• One Travel Restraint Line
• One 6 ft Fall Arrest Lanyard with rebar hook
• Complete with kit bag
• Clear instructions

USARL: 6 ft Adjustable " Webbing" Lanyard

This Work Positioning and Fall Restraint lanyard allows the user to work in multiple areas in Fall Restraint. This is achieved by the adjustment of the lanyard to the required length.

Where required, this same lanyard can be used for Work Positioning by means of attachment to the work position belt. The Lanyard can then be adjusted to the required length.

• Adjustable from 3'6" to 6'
• Fall Restraint or Work Positioning
• Two karabiners for attachment
• Simple slide adjustment.
  
• Ideal for working in Aerial Platforms
• ANSI Z359.1-2007

USSSLA: Travel Restraint Line

This Travel Restraint Line allows the user to work in multiple areas in Fall Restraint this is acheived by the adjustment of the line to the required length. Either end of the line can be connected to the anchorage allowing both the facility for the worker to adjust the line at the user end or for added security, at the anchorage end.

Where required, this same lanyard can be used for Work Positioning.

When it is being used to support the worker in position, a secondary backup system should also be used in line with the rules for Work Positioning.

• Adjustable from 1'6" to 32'
• Fall Restraint and Work Positioning
• For flat and pitched roofs
• Simple adjustment device
• A lanyard can be attached as an extension for ease of use

USSA01 : Roof Truss Anchor

This product is designed to be used as an anchorage device on wooden frame roof structures. This anchorage device can be used as part of a personal fall arrest system. When used as part of a fall arrest system it is important to correctly incorporate all other elements that are required.

Before installation it is important that the wooden frame structure is capable of withstanding the anticipated loads.

This anchor should only be used with compatible components, for further information please contact SpanSet Inc.

• Provides a quantified anchor where
  none is available
• Durable design
• For roof top applications
• Easy to install
• With clear fitting instructions
• A safe alternative to expensive
  engineered solutions

This Horizontal life line is easily installed and tensioned using the built in ratchet system.

For Fall Restraint purposes the horizontal safety line can be used in conjunction with the fixed length or adjustable restraint and fall arrest lanyards. It can also be used as an anchorage for use with the SpanSet Travel Restraint Line.

Horizontal Safety Line :

For fall arrest use it can be used with all SpanSet Inc Fall
Arrest Lanyards. If you are in any doubt as to the compatibility of use with other manufacturers Lanyards please Contact SpanSet Inc. It is tested for two person use, but SpanSet Inc advise that this type of system should be for use by one person only. The assembly is provided in a robust bag with shoulder straps enabling the user to easily carry it to the workplace.

For safety, a wear indicator line is incorporated into the webbing edge. If it becomes visible, the safety line must be taken out of service Available with loops at each end Standard length 65ft. HSL-LL = Horizontal Safety Line with Loops Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use (see page 10)

For safety, a wear indicator line is incorporated into the
webbing edge. If it becomes visible, the safety line must be taken out of service

Available with loops at each end Standard length 65ft.
HSL-LL = Horizontal Safety Line with Loops
Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use.

Tension Force Indicator (TFI)

Now you can easily determine the amount of pre-tension you have introduced when tensioning the HSL with the innovative and patented Tension Force Indicator available only from SpanSet!

This helps prevent over tensioning of the system and ensures the correct tension is applied every time it is used.

• Webbing loops at each end for attachment
• Built in Wear Indicator
• Available in blue and red or black
• Tension force indicator
• For two person use
• Individually serial numbered for traceability
• ANSI A10.32-2004
• EN 795:1996 Class C

Order Codes :
Black: USHSL-LLBK
Blue/red: USHSL-LL