Work Restraint - Horizontal Safety Line

This Horizontal life line is easily installed and tensioned using the built in ratchet system. For Fall Restraint purposes the horizontal safety line can be used in conjunction with the fixed length or adjustable restraint and fall arrest lanyards. It can also be used as an anchorage for use with the SpanSet Travel Restraint Line.

Horizontal Safety Line :

For fall arrest use it can be used with all SpanSet Inc Fall
Arrest Lanyards. If you are in any doubt as to the compatibility of use with other manufacturers Lanyards please Contact SpanSet Inc. It is tested for two person use, but SpanSet Inc advise that this type of system should be for use by one person only. The assembly is provided in a robust bag with shoulder straps enabling the user to easily carry it to the workplace.

For safety, a wear indicator line is incorporated into the webbing edge. If it becomes visible, the safety line must be taken out of service Available with loops at each end Standard length 65ft. HSL-LL = Horizontal Safety Line with Loops Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use (see page 10)

For safety, a wear indicator line is incorporated into the
webbing edge. If it becomes visible, the safety line must be taken out of service

Available with loops at each end Standard length 65ft.
HSL-LL = Horizontal Safety Line with Loops
Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use.

Tension Force Indicator (TFI)

Now you can easily determine the amount of pre-tension you have
introduced when tensioning the HSL with the innovative and patented
Tension Force Indicator available only from SpanSet! This helps prevent over tensioning of the system and ensures the correct tension is applied every time it is used.

• Webbing loops at each end for attachment
• Built in Wear Indicator
• Available in blue and red or black
• Tension force indicator
• For two person use
• Individually serial numbered for traceability
• ANSI A10.32-2004
• EN 795:1996 Class C

Order Codes :
Black: USHSL-LLBK
Blue/red: USHSL-LL