When working on towers and masts, personnel are often exposed to fall hazards outside normal expectations.
The complexity of the situation often means that a high level of training is required and the types of equipment needed.
For over ten years now SpanSet have been developing and presenting training and equipment solutions including rescue for these industry sectors.
SpanSet have a large range of training courses and equipment specific to this field.
In addition to the range already in place SpanSet are working closely with customers to provide bespoke solutions where required.
|
- One rear fall arrest attachment point
- Rescue / confined Space loops on shoulder
- Webbing loops to front for attachment
- Robust steel fittings
- Robust construction
- Adjustable legs
- Shoulder and chest slide adjustment
- ANSI Z359 .1-2007
|
US1104
Full Body Harness
This item offers webbing loops at the chest to facilitate front attachment for fall arrest systems and rescue. The addition of the
Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and environments including
Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel belt to facilitate work positioning |
 |
- One rear fall arrest attachment point
- Rescue / confined space loops on shoulder
- "D" ring to chest for front attachment
- "D" ring to waist belt for abseiling
- Robust steel fittings
- Robust construction
- Adjustable legs
- Shoulder and chest slide adjustment
- ANSI Z359 .1-2007
|
US1800
Full Body Harness (Riggers)
This is a harness designed for the specialists working at height.
The multiple attachment points make this harness perfect for all elements of Fall Protection including Roped Access operations.
The inclusion of numerous equipment and gear loops make this harness suitable for those personnel who have to wear a harness all day. |
 |
- Easily fitted to SpanSet US1100, US1101, US1104 harness Range
- Side "D" rings for work position lanyard attachment
- Equipment loops for gear stowage
- With clear fitting instructions
- Fully adjustable
|
USEXCEL-BELT
Work Positioning Belt
This item is available as a "Retro fit" accessory to the SpanSet harness range allowing the user to operate in work positioning where required. It is easily fitted to the existing harness range allowing equipment/ tool stowage by means of the equipment loops on the belt. It is also adjustable up to a large 40inches where required. |
 |
- Adjustable from 1 'to 6 '
- Fall Restraint or Work Positioning
- Two karabiners for attachment
- Simple trigger adjustment device
- Protective wear sleeve
|
USWPL
6 ft Adjustable "Rope" Lanyard
This Work Positioning and Fall Restraint lanyard allows the user to work in multiple areas in Fall Restraint. This is achieved by the adjustment of the lanyard to the required length.
Where required, this same lanyard can be used for Work Positioning by means of attachment to the work position belt. The Lanyard can then be adjusted to the required length. The protective wear sleeve allows this lanyard to stand up to every day wear and tear. |
 |
- 6 ft length including fittings
- Twin leg for 100% attachment
- Captive eye safety hooks for security
- Individually serial numbered
- Clear instructions
- ANSI Z 359.1-2007
|
US3053D-S
6 ft Twin Leg Fall Arrest Lanyard
This lanyard is fitted with an energy absorber for Fall Arrest use. The twin safety hooks at the anchor end allow the user to maintain 100% connection while moving around the structure. This lanyard is ideal for uses such as tower and mast climbing where "double clipping" is used to climb the structure.
Where required, this same lanyard can be used for back up purposes when operating in Work Positioning such as tower, mast or pole work. |
 |
- 6 ft length including fittings
- Safety Hook for attachment to harness
- Twin leg for 100% attachment
- Rebar hooks
- Individually serial numbered
- Clear Instructions
- ANSI Z 359.1-2007
|
US3055D-R
6 ft Twin Leg Fall Arrest Lanyard
This lanyard is fitted with an energy absorber for Fall Arrest use. The twin rebar hooks at the anchor end allow the user to maintain 100% connection while moving around the structure. This lanyard is ideal for uses such as tower and mast climbing where "double clipping" is used to climb the structure.
Where required, this same lanyard can be used for back up purposes when operating in Work Positioning such as tower, mast or pole work.
Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker. |
SpanSet kits designed for this type of work: Tower and Mast Kits |
|
 |
- US1104 harness with rear attachment point
- Front attachment for fall arrest systems and rescue
- Excel Belt for work position
- Twin leg 6 ft fall arrest lanyard with rebar hooks
- Work Position Lanyard adjustable length 1 ' to 6 '
- US1104 harness with rear attachment point
- Front attachment for fall arrest systems and rescue
- Comfort pads for fitting to harness
- Excel Belt for work position
- Twin leg 6 ft fall arrest lanyard with rebar hooks
Work Position Lanyard adjustable length 1 ' to |
USCL1
Climbers Kit 1
This kit is designed for those workers who are required to undertake tasks at height on structures such as masts, towers, and antennas. It provides the security of the US1104 harness with the added facility of the Excel work positioning belt to allow workers to work hands free. The US1104 Harness also allows the attachment to vertical type fall arrest systems and rescue kits using the front attachment points.
Harness available in STD, LG AND XL Sizes
USCL2
Climbers Kit 2
This Kit is designed for those workers who are required to undertake tasks at height on structures such as masts, towers, and antennas. It provides the security of the US1104 harness with the added facility of the Excel work positioning belt to allow workers to work hands free. It also has comfort pads to the rear, shoulders and legs for those who work for extended periods of time. The US1104 harness also allows the user to attach to vertical type fall arrest systems and rescue kits using the front attachment points.
Harness available in STD, LG AND XL Sizes
|
