Scaffolding

Anchorage-

USWRAPPA : Anchorage connector
The WRAPPA is for single person use as an anchor point onto vertical scaffold poles (standards). It is for use with a shock-absorbing lanyard and full body fall-arrest harness.

SpanSet recommends that all PPE be personal issue. It can be easily positioned while in use and pre-positioned prior to the tube being installed.
ANSI Z 359.1-2007

• Provides a quantified anchor point on a standard scaffold tube.
• Color coded to ensure correct installation and use.
• Continuous polyester sling surrounded with a protective tubular sleeve
• MBS 70 kN
• Supplied with clear user instructions

USATSL : Anchorage connector, sling
Continuous polyester sling surrounded with a protective tubular sleeve.

Can be used to provide a quantified attachment on structures where Karabiners and connectors cannot be used.

Supplied with clear instructions and individually serial numbered for traceability.

• Provides a point of attachment on a structure
• Continuous polyester sling surrounded with a protective tubular sleeve
• Available in black or purple
• Supplied with clear user instructions
• Individually serial numbered for traceability

Lanyards-

US3055: 6 ft Fall Arrest Lanyard
This lanyard is fitted with an energy absorber for Fall Arrest use. The karabiner at the user end provides a secure attachment to the harness while the rebar hook at the anchor end provides attachment to scaffold etc
Where required, this same lanyard can be used for back-up purposes when operating in Work Positioning such as tower, mast or pole work.

Care must be taken when using Fall Arrest

• 6ft Length including fitting
• Karabiner at user end
• Rebar hook at anchor end
• Individually serial numbered
• Clear Instructions
• ANSI Z 359.1-2007

US3055D-R : 6 ft Twin Leg Fall Arrest Lanyard
This lanyard is fitted with an energy absorber for Fall Arrest use. The twin rebar hooks at the anchor end allow the user to maintain 100% connection while moving around the structure. This lanyard is ideal for uses such as tower and mast climbing where "double clipping" is used to climb the structure.

Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker.

• 6 ft length including fittings
• Safety Hook for attachment to harness
• Twin leg for 100% attachment
• Rebar hooks
• Individually serial numbered
• Clear Instructions
• ANSI Z 359.1-2007

Full Body Harnesses-

USUniversal : Full Body Harness
There are many types of harness, however for Fall Protection a simple full body harness is often all that is required. This type of harness is lightweight and easy to adjust allowing a full range of normal movement. The rear attachment point allows the user to secure themselves to the system while keeping the connecting

• One rear fall arrest attachment point
• Lightweight construction
• Robust steel fittings
• Adjustable shoulders
• Adjustable legs
• ANSI Z359 .1-2007

US1100 : Full Body Harness
This is similar to the Universal but offers a more robust construction for different environments.

The addition of the Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel Belt to facilitate work positioning.

• One rear fall arrest attachment point
• Rescue / confined space loops on shoulder
• Robust steel fittings
• Robust construction
• Slide adjustment on legs, shoulders and chest
• ANSI Z359.1-2007

Trauma Relief Straps-

USSL : Suspension Relief Loop
Suspension in a harness following a fall, may cause complications. To help alleviate this, the SpanSet suspension loop can be attached at a point above the victim by a colleague and deployed for the victim to stand in. This will help to relieve some of the effects and extend the period of time for a rescue to be effected

• Clearly packaged as emergency equipment
• Clear instructions on packaging
• Easy to use
• MBS 350LBS

Rescue-

USGOTCHA : Gotcha Rescue Kit
The original kit in the range, designed for tradesmen who work at height.

The Gotcha rescue kit is a unique solution to a problem faced by all workers at height who use PPE for protection against falls. Most rescue provision has focused on the more extreme activities carried out at height, the Gotcha kit is designed for tradesmen who use common items of fall protection. In the event of a fall their situation if suspended in a harness is just as serious as any other worker and a swift recovery is essential.

• Suitable for Rescue from - Lanyards and Retractable lifelines
• This is a no-cut kit - The casualty is raised to release their original attachment
• Rescue direction - You can raise or lower the casualty with this kit
• Pre-assembled - No assembly is required by the user
• Remote attachment - The casualty can be attached from a point of safety
• Single person use - The Gotcha is for raising or lowering a single person
• Maximum Working Length - The Gotcha kit is available in four lengths.
• Color coding - The kit is color coded for simplicity

SpanSet Kits that are designed for this type of work:

USSCAF1 : Kit for Scaffolders
A kit designed for those who specifically work in the scaffold or construction industry.

Provides a harness which complies with the legislation, regulations and guidance for working in construction

• US1100 or US1101 harness with rear attachment point
• Single leg 6 ft fall arrest lanyard with rebar hook
• WRAPPA Anchorage Connector for attachment to scaffold tube
• Complete with kit bag
• Clear instructions

USSCAF2 : Kit for Scaffolders
A kit designed for those who specifically work in the scaffold or construction Industry.
Provides a harness which complies with the legislation, regulations and guidance for working in construction

This kit also includes a twin leg 6 ft Fall Arrest Lanyard and two "Wrappa" Anchor Connectors suitable for use on scaffold structures.

• US1100 or US1101 harness with rear attachment point
• Twin leg 6 ft fall arrest lanyard with rebar hooks
• 2 WRAPPA Anchorage Connectors for attachment to scaffold tube
• Complete with kit bag
• Clear instructions
• Inspection information pocket