Rooftop Safety and Safety for Roof Work

SpanSet Have developed a range of Safety Solutions for working on rooftops or near exposed and unprotected edges.

Our knowledge in this area has undergone continual development with our clients and from the experience gained through our training department.

Our products range from temporary Fall protection solutions right through to permanently installed systems.

Most roof work is likely to take place in areas where Fall Restraint techniques are possible. Therefore most of the equipment is designed to be set up to limit the users movement and travel and prevent a fall occurring.

Not all of the products are designed exclusively for Fall Restraint. Most of them are multi-purpose and can be used in other methods of work.

Anchorage-

USSA01 : Roof Truss Anchor

This product is designed to be used as an anchorage device on wooden frame roof structures. This anchorage device can be used as part of a personal fall arrest system. When used as part of a fall arrest system it is important to correctly incorporate all other elements that are required.

Before installation it is important that the wooden frame structure is capable of withstanding the anticipated loads. This anchor should only be used with compatible components, for further information please contact SpanSet Inc.

Provides a quantified anchor where none is available
Durable design
For roof top applications
Easy to install
With clear fitting instructions
A safe alternative to expensive
engineered solutions

USRL3K Fall Restraint Lanyard for fall prevention

Lanyards-

US3051: 6 ft Fall Arrest Lanyard

This lanyard is fitted with an Energy absorber for Fall Arrest use. The karabiners are captive to the lanyard for security.

Where required, this same lanyard can be used as a back up for Work Positioning such as tower, mast or pole work.

Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker.

6ft length including fittings
Double action steel karabiners
Individually serial numbered
Clear instructions
ANSI Z 359.1-2007

Full Body Harnesses-

USUniversal : Full Body Harness

There are many types of harness, however for Fall Protection a simple full body harness is often all that is required.

This type of harness is lightweight and easy to adjust allowing a full range of normal movement.

The rear attachment point allows the user to secure themselves to the system while keeping the connection element out of their working area.

One rear fall arrest attachment point
Lightweight construction
Robust steel fittings
Adjustable shoulders
Adjustable legs
ANSI Z359 .1-2007

Travel Restraint Line-

USRA50PSG: 50 Foot, Travel Restraint line including Grab

This Travel Restraint Line allows the user to work in multiple areas. Fall Restraint can achieved by the adjustment of the line to the required length.

Either end of the line can be connected to the anchorage allowing the facility for the worker to adjust the line at the user end or for added security, at the anchorage end.

Where required, this same lanyard can be used for Work Positioning. When it is being used to support the worker in position, a secondary backup system should also be used in line with the rules for Work Positioning.

Fifty Feet Adjustable Length
Lightweight Construction
Spliced at both ends for security
"Fitted" Adjustable Rope Grab
Steel Safety Hook for anchorage
Fall Restraint and Work positioning
A lanyard can be attached as an extension
For flat and pitched roofs

USRA50PSG: 50 Foot, Travel Restraint line including Grab

Complete Roofer's Kit-

URFB1

Contents:

USSA01 : Roof Truss Anchor
US3051: 6 ft Fall Arrest Lanyard
USUniversal : Full Body Harness
USRA50PSG: 50 Foot, Travel Restraint line including Grab

Waterproof re-sealable bucket
Contains all Item Instructions
Robust but Lightweight Bucket
Clear labeling for identification