Products - Lanyards

Fall Restraint is the preferred approach to fall protection - it prevents the user from approaching and entering the hazard and ultimately from suffering possible injury resulting from a fall.

USRL3K : Fall Restraint Lanyard:

There are many types of lanyard. For Fall Restraint, a lanyard of the correct length and with suitable fittings is often all that is required.

Providing the correct length is selected, this type of lanyard is suitable for a number of Fall Restraint applications including working in AWP'S.

• Fixed Length at 3 ft
• For Fall Restraint
• Two karabiners for attachment
• Fittings are captive to prevent loss
• ANSI Z359.1-2007

USRL6K : Fall Restraint Lanyard:

This is a 6 ft fixed length Fall Restraint lanyard. It has been fitted with captivated Karabiners at both ends for security.

Providing the correct length is selected, this type of lanyard is suitable for a number of Fall Restraint applications including working in AWP'S.

• Fixed Length at 6 ft
• For Fall Restraint
• Two Karabiners for attachment
• Fittings are captive to prevent loss
• ANSI Z359.1-2007

USRL6S :Fall Restraint Lanyard:

This is a 6 ft fixed length Fall Restraint lanyard. It has been fitted with captive eye safety hooks at both ends for security.

Providing the correct length is selected, this type of lanyard is suitable for a number of Fall Restraint applications including working in AWP'S.

• Fixed Length at 6 ft
• For Fall Restraint
• Two karabiners for attachment
• Captive fittings to prevent loss
• ANSI Z359.1-2007

USARL: 6 ft Adjustable " Webbing" Lanyard

This Work Positioning and Fall Restraint lanyard allows the user to work in multiple areas in Fall Restraint. This is achieved by the adjustment of the lanyard to the required length.

Where required, this same lanyard can be used for Work Positioning by means of attachment to the work position belt. The Lanyard can then be adjusted to the required length.

• Adjustable from 3'6" to 6'
• Fall Restraint or Work Positioning
• Two karabiners for attachment
• Simple slide adjustment.
  
• Ideal for working in Aerial Platforms
• ANSI Z359.1-2007

USWPL: 6 ft Adjustable "Rope" Lanyard

This Work Positioning and Fall Restraint lanyard allows the user to work in multiple areas in Fall Restraint. This is acheived by the adjustment of the lanyard to the required length.

Where required, this same lanyard can be used for Work Positioning by means of attachment to the work position belt. The Lanyard can then be adjusted to the required length. The protective wear sleeve allows this lanyard to stand up to every day wear and tear.

• Adjustable from 1'to 6'
• Fall Restraint or Work Positioning
• Two karabiners for attachment
• Simple trigger adjustment device
• Protective wear sleeve
• Ideal for working in Aerial Platforms
• ANSI Z359.1-2007

Fall Arrest is the only category of Fall Protection where a fall is actually allowed to occur.

The equipment is then required to act in such a way as to limit both the fall distance and the impact forces received by the worker.

US3051: 6 ft Fall Arrest Lanyard

This lanyard is fitted with an Energy absorber for Fall Arrest use. The karabiners are captive to the lanyard for security.

Where required, this same lanyard can be used as a back up for Work Positioning such as tower, mast or pole work.

Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker.

• 6ft length including fittings
  
• Double action steel karabiners
• Individually serial numbered
• Clear instructions
• ANSI Z 359.1-2007

US3053: 6 ft Fall Arrest Lanyard

This lanyard is fitted with an energy absorber for Fall Arrest use. The fitted safety hooks provide a positive connection to the harness and anchorage.

Where required, this same lanyard can be used as a back-up when operating in Work Positioning such as tower, mast or pole work.

Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker.

• 6ft Length including fittings
• Captive eye safety hooks
• Individually serial numbered
• Clear instructions
• ANSI Z 359.1-2007

US3055: 6 ft Fall Arrest Lanyard

This lanyard is fitted with an energy absorber for Fall Arrest use. The karabiner at the user end provides a secure attachment to the harness while the rebar hook at the anchor end provides attachment to scaffold etc.

Where required, this same lanyard can be used for back-up purposes when operating in Work Positioning such as tower, mast or pole work.

Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker.

• 6ft Length including fittings
• Karabiner at user end
• Rebar hook at anchor end
• Individually serial numbered
• Clear Instructions
• ANSI Z 359.1-2007

Fall Arrest is the only category of Fall Protection where a fall is actually allowed to occur. The equipment is then required to act in such a way as to limit both the fall distance and the impact forces received by the worker.

US3053D-S : 6 ft Twin Leg Fall Arrest Lanyard

This lanyard is fitted with an energy absorber for Fall Arrest use. The twin safety hooks at the anchor end allow the user to maintain 100% connection while moving around the structure. This lanyard is ideal for uses such as tower and mast climbing where "double clipping" is used to climb the structure.

Where required, this same lanyard can be used for back up purposes when operating in Work Positioning such as tower, mast or pole work.

• 6 ft length including fittings
• Twin leg for 100% attachment
• Captive eye safety hooks for security
• Individually serial numbered
• Clear instructions
• ANSI Z 359.1-2007

US3055D-R : 6 ft Twin Leg Fall Arrest Lanyard

This lanyard is fitted with an energy absorber for Fall Arrest use. The twin rebar hooks at the anchor end allow the user to maintain 100% connection while moving around the structure. This lanyard is ideal for uses such as tower and mast climbing where "double clipping" is used to climb the structure.

Where required, this same lanyard can be used for back up purposes when operating in Work Positioning such as tower, mast or pole work.

• 6 ft length including fittings
• Safety Hook for attachment to harness
• Twin leg for 100% attachment
• Rebar hooks
• Individually serial numbered
• Clear Instructions
• ANSI Z 359.1-2007