Products - Anchor Devices

Anchorages to which personal Fall Protection equipment is to be attached should be capable of sustaining the anticipated loads. Whether working in Fall Restraint Work Positioning or in Fall Arrest an assessment of the anchorage should be made to ascertain it's suitability for the intended purpose.

USWRAPPA : Anchorage connector

The WRAPPA is for single person use as an anchor point onto vertical scaffold poles (standards). It is for use with a shock-absorbing lanyard and full body fall-arrest harness. SpanSet recommends that all PPE be personal issue. It can be easily positioned while in use and pre positioned prior to the tube being installed.

Scaffold work is a dangerous activity - learn how to use the WRAPPA and make sure you understand how it works. If in any doubt contact SpanSet Inc.

ANSI Z 359.1-2007

• Provides a quantified anchor point on a standard scaffold tube.
• EWL 2 ft
• Color coded to ensure correct installation and use.
• Continuous polyester sling surrounded with a protective tubular sleeve
• MBS 70 kN Supplied with clear user instructions
• Individually serial numbered for traceability

USST60 : Anchorage connector, sling

The Steeltex sling has been developed specifically for those areas where sharp edges and a harsh environment.

It is widely used for law enforcement and military applications as well as in the entertainment and mining / quarrying industries.

Available in lengths; 3ft, 6ft, 9ft

• Provides a point of attachment on a structure
• Continuous steel cable sling
• Protective tubular sleeve
• Examination window for regular
  inspections
• Available in black for Military or
  Entertainment Industry
• Supplied with clear user instructions
• Individually serial numbered for
  traceability

USATSL : Anchorage connector, sling

Continuous polyester sling surrounded with a protective
tubular sleeve.

Can be used to provide a quantified attachment on structures where Karabiners and connectors cannot be used.

Supplied with clear instructions and individually serial numbered for traceability.

Available in lengths; 3ft, 4ft, 6ft, 9ft

• Provides a point of attachment on a structure
• Continuous polyester sling surrounded
  with a protective tubular sleeve
• Available in black or purple
• Supplied with clear user instructions
• Individually serial numbered for
  traceability

USSA01 : Roof Truss Anchor

This product is designed to be used as an anchorage device on wooden frame roof structures. This anchorage device can be used as part of a personal fall arrest system. When used as part of a fall arrest system it is important to correctly incorporate all other elements that are required.

Before installation it is important that the wooden frame structure is capable of withstanding the anticipated loads.

This anchor should only be used with compatible components, for further information please contact SpanSet Inc.

• Provides a quantified anchor where none is available
• Durable design
• For roof top applications
• Easy to install
• With clear fitting instructions
• A safe alternative to expensive
  engineered solutions

USPull-Lock : Pull Lock Anchor

It is important that you drill the correct size hole into your concrete, clean out the drilling dust and insert the unit.

The anchor is suitable for horizontal, vertical, and overhead concrete structures.

The anchor can be can be removed and re-fitted and reused at any desired location.

Following completion of the task the anchor can then be removed and the hole filled in.

A safe alternative to expensive engineered solutions.

• Provides a quantified anchor where none is available
• Re-useable
• For concrete applications
• Simple to install and remove
• With clear fitting instructions
• ANSI Z359.1-2007

USToggle : Toggle Lock Anchor

It is important that you drill the correct size hole into your concrete, clean out the drilling dust and insert the unit, the toggle then rotates into the cavity locking the anchor in place.

The anchor is suitable for horizontal, vertical, and overhead concrete structures.

The anchor can be can be removed and re-fitted and reused at any desired location.

Following completion of the task the anchor can then be removed and the hole filled in.

A safe alternative to expensive engineered solutions.

• Provides a quantified anchor where none is available
• Durable design
• For Concrete cavity applications
• Easy to install and remove
• With clear fitting instructions
• A safe alternative to expensive
  engineered solutions

Horizontal Safety Line :

For fall arrest use it can be used with all SpanSet Inc Fall
Arrest Lanyards. If you are in any doubt as to the compatibility of use with other manufacturers Lanyards please Contact SpanSet Inc. It is tested for two person use, but SpanSet Inc advise that this type of system should be for use by one person only. The assembly is provided in a robust bag with shoulder straps enabling the user to easily carry it to the workplace.

For safety, a wear indicator line is incorporated into the webbing edge. If it becomes visible, the safety line must be taken out of service Available with loops at each end Standard length 65ft. HSL-LL = Horizontal Safety Line with Loops Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use (see page 10)

For safety, a wear indicator line is incorporated into the
webbing edge. If it becomes visible, the safety line must be taken out of service

Available with loops at each end Standard length 65ft.
HSL-LL = Horizontal Safety Line with Loops
Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use.

Tension Force Indicator (TFI)

Now you can easily determine the amount of pre-tension you have
introduced when tensioning the HSL with the innovative and patented
Tension Force Indicator available only from SpanSet! This helps prevent over tensioning of the system and ensures the correct tension is applied every time it is used.

• Webbing loops at each end for attachment
• Built in Wear Indicator
• Available in blue and red or black
• Tension force indicator
• For two person use
• Individually serial numbered for traceability
• ANSI A10.32-2004
• EN 795:1996 Class C

Order Codes :
Black: USHSL-LLBK
Blue/red: USHSL-LL