Fall Arrest - Tower & Mast

USUniversal : Full Body Harness

There are many types of harness, however for Fall Protection a simple full body harness is often all that is required. This type of harness is lightweight and easy to adjust allowing a full range of normal movement. The rear attachment point allows the user to secure themselves to the system while keeping the connecting element out of their working area.

• One rear fall arrest attachment point
• Lightweight construction
• Robust steel fittings
• Adjustable shoulders
• Adjustable legs
• ANSI Z359 .1-2007

US1100 : Full Body Harness

This is similar to the Universal but offers a more robust construction for different environments. The addition of the Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and environments including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel Belt to facilitate work positioning.

• One rear fall arrest attachment point
• Rescue / confined space loops on shoulder
• Robust steel fittings
• Robust construction
• Slide adjustment on legs, shoulders and chest
• ANSI Z359.1-2007

US1104 : Full Body Harness

This item offers webbing loops at the chest to facilitate front attachment for fall arrest systems and rescue. The addition of the Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and environments including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel belt to facilitate work positioning

• One rear fall arrest attachment point
• Rescue / confined Space loops on shoulder
• Webbing loops to front for attachment
• Robust steel fittings
• Robust construction
• Adjustable legs
• Shoulder and chest slide adjustment
• ANSI Z359 .1-2007

US3055D-R : 6 ft Twin Leg Fall Arrest Lanyard

This lanyard is fitted with an energy absorber for Fall Arrest use. The twin rebar hooks at the anchor end allow the user to maintain 100% connection while moving around the structure. This lanyard is ideal for uses such as tower and mast climbing where "double clipping" is used to climb the structure.

Where required, this same lanyard can be used for back up purposes when operating in Work Positioning such as tower, mast or pole work.

• 6 ft length including fittings
• Safety Hook for attachment to harness
• Twin leg for 100% attachment
• Rebar hooks
• Individually serial numbered
• Clear Instructions
• ANSI Z 359.1-2007

US3055: 6 ft Fall Arrest Lanyard

This lanyard is fitted with an energy absorber for Fall Arrest use. The karabiner at the user end provides a secure attachment to the harness while the rebar hook at the anchor end provides attachment to scaffold etc.

Where required, this same lanyard can be used for back-up purposes when operating in Work Positioning such as tower, mast or pole work.

Care must be taken when using Fall Arrest Lanyards to ensure there is sufficient clearance distance below the worker.

• 6ft Length including fittings
• Karabiner at user end
• Rebar hook at anchor end
• Individually serial numbered
• Clear Instructions
• ANSI Z 359.1-2007

USSCAF1 : Kit for Scaffolders

A kit designed for those who specifically work in the scaffold or construction industry.

Provides a harness which complies with the legislation, regulations and guidance for working in construction.

This kit also includes a 6 ft Fall Arrest Lanyard and one "Wrappa" Anchorage Connector suitable for use on scaffold structures.

Harness available in STD, LG AND XL Sizes

• US1100 or US1101 harness with rear attachment point
• Single leg 6 ft fall arrest lanyard with rebar hook
• WRAPPA Anchorage Connector for attachment to scaffold tube
• Complete with kit bag
• Clear instructions
• Inspection information pocket card

USSCAF2 : Kit for Scaffolders

A kit designed for those who specifically work in the scaffold or construction Industry.

Provides a harness which complies with the legislation, regulations and guidance for working in construction.

This kit also includes a twin leg 6 ft Fall Arrest Lanyard and two "Wrappa" Anchor Connectors suitable for use on scaffold structures.

Harness available in STD, LG AND XL Sizes

• US1100 or US1101 harness with
  rear attachment point
• Twin leg 6 ft fall arrest lanyard
  with rebar hooks
• 2 WRAPPA Anchorage Connectors
  for attachment to scaffold tube
• Complete with kit bag
• Clear instructions
• Inspection information pocket card

USWRAPPA : Anchorage connector

The WRAPPA is for single person use as an anchor point onto vertical scaffold poles (standards). It is for use with a shock-absorbing lanyard and full body fall-arrest harness. SpanSet recommends that all PPE be personal issue. It can be easily positioned while in use and pre positioned prior to the tube being installed.

Scaffold work is a dangerous activity - learn how to use the WRAPPA and make sure you understand how it works. If in any doubt contact SpanSet Inc.

ANSI Z 359.1-2007

• Provides a quantified anchor point on a standard scaffold tube.
• EWL 2 ft
• Color coded to ensure correct installation and use.
• Continuous polyester sling surrounded with a protective tubular sleeve
• MBS 70 kN Supplied with clear user instructions
• Individually serial numbered for traceability

USCL1 : Climbers Kit 1

This kit is designed for those workers who are required to undertake tasks at height on structures such as masts, towers, and antennas. It provides the security of the US1104 harness with the added facility of the Excel work positioning belt to allow workers to work hands free. The US1104 Harness also allows the attachment,to vertical type fall arrest systems and rescue kits using the front attachment points.

Harness available in STD, LG AND XL Sizes

• US1104 harness with rear attachment point
  
• Front attachment for fall arrest systems and rescue
• Excel Belt for work position
• Twin leg 6 ft fall arrest lanyard with rebar hooks
• Work Position Lanyard adjustable length 1' to 6'
• Complete with kit bag
• Clear instructions

USCL2 : Climbers Kit 2

This Kit is designed for those workers who are required to undertake tasks at height on structures such as masts, towers, and antennas. It provides the security of the US1104 harness with the added facility of the Excel work positioning belt to allow workers to work hands free. It also has comfort pads to the rear, shoulders and legs for those who work for extended periods of time. The US1104 harness also allows the user to attach to vertical type fall arrest systems and rescue kits using the front attachment points.

Harness available in STD, LG AND XL Sizes

• US1104 harness with rear attachment point
• Front attachment for fall arrest systems and rescue
• Comfort pads for fitting to harness
• Excel Belt for work position
• Twin leg 6 ft fall arrest lanyard with rebar hooks
• Work Position Lanyard adjustable length 1' to 6'
• Complete with kit bag
• Clear instructions

USARL: 6 ft Adjustable " Webbing" Lanyard

This Work Positioning and Fall Restraint lanyard allows the user to work in multiple areas in Fall Restraint. This is achieved by the adjustment of the lanyard to the required length.

Where required, this same lanyard can be used for Work Positioning by means of attachment to the work position belt. The Lanyard can then be adjusted to the required length.

• Adjustable from 3'6" to 6'
• Fall Restraint or Work Positioning
• Two karabiners for attachment
• Simple slide adjustment.
  
• Ideal for working in Aerial Platforms
• ANSI Z359.1-2007

USWPL: 6 ft Adjustable "Rope" Lanyard

This Work Positioning and Fall Restraint lanyard allows the user to work in multiple areas in Fall Restraint. This is acheived by the adjustment of the lanyard to the required length.

Where required, this same lanyard can be used for Work Positioning by means of attachment to the work position belt. The Lanyard can then be adjusted to the required length. The protective wear sleeve allows this lanyard to stand up to every day wear and tear.

• Adjustable from 1'to 6'
• Fall Restraint or Work Positioning
• Two karabiners for attachment
• Simple trigger adjustment device
• Protective wear sleeve
• Ideal for working in Aerial Platforms
• ANSI Z359.1-2007

USEXCEL-BELT :

Work Positioning Belt This item is available as a "Retro fit" accessory to the SpanSet harness range allowing the user to operate in work positioning where required. It is easily fitted to the existing harness range allowing equipment/ tool stowage by means of the equipment loops on the belt. It is also adjustable up to a large 40 inches where required.

• Easily fitted to SpanSet US1100, US1101, US1104 and US1800 harness Range
• Side "D" rings for work position
  lanyard attachment
• Equipment loops for gear stowage
• With clear fitting instructions
• Fully adjustable

USUniversal : Full Body Harness

There are many types of harness, however for Fall Protection a simple full body harness is often all that is required. This type of harness is lightweight and easy to adjust allowing a full range of normal movement. The rear attachment point allows the user to secure themselves to the system while keeping the connecting element out of their working area.

• One rear fall arrest attachment point
• Lightweight construction
• Robust steel fittings
• Adjustable shoulders
• Adjustable legs
• ANSI Z359 .1-2007

US1100 : Full Body Harness

This is similar to the Universal but offers a more robust construction for different environments. The addition of the Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and environments including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel Belt to facilitate work positioning.

• One rear fall arrest attachment point
• Rescue / confined space loops on shoulder
• Robust steel fittings
• Robust construction
• Slide adjustment on legs, shoulders and chest
• ANSI Z359.1-2007

US1101 : Full Body Harness

This is similar to the 1100 but offers the benefit of the tongue and buckle adjustment on the legs. The addition of the Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and environments including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel belt to facilitate work positioning

• One rear fall arrest attachment point
• Rescue / confined Space loops on shoulder
• Robust steel fittings
• Robust construction
• Adjustable tongue and buckle legs,
• Shoulder and chest slide adjustment
• ANSI Z359 .1-2007

US1104 : Full Body Harness

This item offers webbing loops at the chest to facilitate front attachment for fall arrest systems and rescue. The addition of the Rescue Loops on the shoulders allows the harness to facilitate rescues in a variety of situations and environments including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel belt to facilitate work positioning

• One rear fall arrest attachment point
• Rescue / confined Space loops on shoulder
• Webbing loops to front for attachment
• Robust steel fittings
• Robust construction
• Adjustable legs
• Shoulder and chest slide adjustment
• ANSI Z359 .1-2007

US1104M : Full Body Harness

This harness offers a steel "D" ring variation for the front chest attachment point. The addition of the Rescue Loops on the shoulders allows the harness to facilitate Rescues in a variety of situations and environments including Fall Arrest and Confined Space. It can also be "Retro" fitted with the Excel belt to facilitate work positioning

• One rear fall arrest attachment point
• Rescue / confined space loops on shoulder
• "D" ring to chest for front attachment
• Robust steel fittings
• Robust construction
• Adjustable legs
• Shoulder and chest slide adjustment
• ANSI Z359 .1-2007

US1800 : Full Body Harness

This is a harness designed for the specialists working at height.
The multiple attachment points make this harness perfect for all elements of Fall Protection including Roped Access operations. The inclusion of numerous equipment and gear loops make this harness suitable for those personnel who have to wear a harness all day.

• One rear fall arrest attachment point
• Rescue / confined space loops on shoulder
• "D" ring to chest for front attachment
• "D" ring to waist belt for abseiling
• Robust steel fittings
• Robust construction
• Adjustable legs
• Shoulder and chest slide adjustment
• ANSI Z359 .1-2007

USRP300 : Rigging Plate

Rigging plates make setting up a rope system safer, quicker and neater. This rigging plate is smaller than most plates on the market yet it is just as strong. It features a single, large center hole that primary connection plus three holes that are each designed to handle karabiners. The holes are well spaced to make it quick and easy to organize connections. All the edges of the plate have been contoured so that they are easy.

• Four attachment points
• Compact size
• Anodized for corrosion resistance
• Aircraft grade aluminum
• MBS 30KN

USEFA : Temporary Vertical Fall Arrest system

This system can be used and removed as desired, following the location of a suitable anchorage this line can be fitted temporarily for access and egress to elevated work areas. It comes complete with it's own protective bag for ease of stowage and transportation.

• Ultra lightweight
• Compact 6:1 hoist system,
• Packs neatly away when
• Weighs only 10.5 ounces
• Individually serial numbered for
  traceability

USCRP6 : Cracker Rescue Hoist

Designed with the rope access technician in mind, this compact 6:1 hoist system, allows the transfer of a victim's weight from one system to another with ease. When not in use it packs neatly into it's own case and is easy to deploy when required. Weighing in at only 10.5 ounces it is ultra light weight and is Individually serial numbered for traceability.

• Ultra lightweight
• Compact 6:1 hoist system,
• Packs neatly away when
• Weighs only 10.5 ounces
• Individually serial numbered for traceability

USKR11: Kernmantle Rope

11.5 mm static kernmantle rope for use in applications such as Rope access, Rigging and rescue. Can be used with the Buddy, and the Rope Rider descender and the swivel cheek pulleys. Available in varying lengths according to your requirements.

• Suitable for use in Roped Access
• Suitable for use with the "BUDDY"
• Suitable for use with the Rope
  Rider descender
• Available in lengths up to 655 ft
  (200 meters)