Fall Arrest - Horizontal Safety Line

Horizontal Safety Line :

For fall arrest use it can be used with all SpanSet Inc Fall
Arrest Lanyards. If you are in any doubt as to the compatibility of use with other manufacturers Lanyards please Contact SpanSet Inc. It is tested for two person use, but SpanSet Inc advise that this type of system should be for use by one person only. The assembly is provided in a robust bag with shoulder straps enabling the user to easily carry it to the workplace.

For safety, a wear indicator line is incorporated into the webbing edge. If it becomes visible, the safety line must be taken out of service Available with loops at each end Standard length 65ft. HSL-LL = Horizontal Safety Line with Loops Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use (see page 10)

For safety, a wear indicator line is incorporated into the
webbing edge. If it becomes visible, the safety line must be taken out of service

Available with loops at each end Standard length 65ft.
HSL-LL = Horizontal Safety Line with Loops
Each HSL is Individually serial numbered for traceability

Note:
Two Attachment slings and two connectors/ Karabiners
are required for use.

Tension Force Indicator (TFI)

Now you can easily determine the amount of pre-tension you have
introduced when tensioning the HSL with the innovative and patented
Tension Force Indicator available only from SpanSet! This helps prevent over tensioning of the system and ensures the correct tension is applied every time it is used.

• Webbing loops at each end for attachment
• Built in Wear Indicator
• Available in blue and red or black
• Tension force indicator
• For two person use
• Individually serial numbered for traceability
• ANSI A10.32-2004
• EN 795:1996 Class C

Order Codes :
Black: USHSL-LLBK
Blue/red: USHSL-LL

USST60 : Anchorage connector, sling

The Steeltex sling has been developed specifically for those areas where sharp edges and a harsh environment.

It is widely used for law enforcement and military applications as well as in the entertainment and mining / quarrying industries.

Available in lengths; 3ft, 6ft, 9ft

• Provides a point of attachment on a
  structure
• Continuous steel cable sling
• Protective tubular sleeve
• Examination window for regular
  inspections
• Available in black for Military or
  Entertainment Industry
• Supplied with clear user instructions
• Individually serial numbered for
  traceability

USATSL : Anchorage connector, sling

Continuous polyester sling surrounded with a protective
tubular sleeve.

Can be used to provide a quantified attachment on structures where Karabiners and connectors cannot be used.

Supplied with clear instructions and individually serial numbered for traceability.

Available in lengths; 3ft, 4ft, 6ft, 9ft

• Provides a point of attachment on a
  structure
• Continuous polyester sling surrounded
  with a protective tubular sleeve
• Available in black or purple
• Supplied with clear user instructions
• Individually serial numbered for
  traceability

USN2562 : Large Karabiner

The offset "D" shape maximizes the karabiner's strength by placing the load close to the back bar of the karabiner. 1 inch gate opening for larger applications. This karabiner comes complete with a captivating pin for application where the karabiner needs to be held in place preventing cross loading or loss.

• Can be used on it's own or fitted
  for use on lanyards
• Complete with pin to allow
  karabiner to be held captive
• Steel construction
• 3600 lb gate
• ANSI Z359.1.- 2007